VPINV-12_800 VE.Direct6271

Victron Phoenix Inverter 12V 800VA

$456.20

In stock

  • Description

Victron Phoenix Inverter 12V 800VA (PIN121800300)

Free Delivery (Australia Wide) With tracking.

Phoenix Inverter range, with Bluetooth connectivity and control via the VictronConnect app. If it has a battery, be Blue Smart and get connected!

Now you can look after your car, motorcycle, boat, jet ski, or any other application you have in style, but of course it doesn t stop there. Blue Smart is great for your workshop, motor home, caravan, any wheeled vehicle, in fact, anywhere you have a battery that needs tender loving care, all controlled directly from your Smartphone, tablet or computer using the VictronConnect app.

VE.Direct Communication Port

The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook s and other devices (VE.Direct Bluetooth Smart dongle needed)

 

Fully Configurable

Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level

 

Monitoring

In- and output voltage, % load and alarms

 

Proven Reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

 

High Start-up Power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

 

ECO Mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

 

Remote On/Off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

 

LED Diagnosis

Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

 

Specifications

Victron Phoenix Inverter 12V 800VA
Cont. power at 25 C 800VA
Cont. power at 25 C / 40 C 650 / 560W
Peak power 1500W
Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Input voltage range 9.2 – 17V
DC low shut down (adjustable) 9.3V
Dynamic (load dependent) DC low shut down
(fully configurable)
Dynamic cut-off, see
https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
DC low restart and alarm (adjustable) 10.9V
Battery charged detect (adjustable) 14.0V
Max. efficiency 90%
Zero-load power 6.5W
Default zero-load power in ECO mode
(default retry interval: 2,5 s, adjustable)
1.0
ECO mode stop and start power setting Adjustable
Protection Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high
Operating temperature range -40 to +65 C (fan assisted cooling), derate 1,25% per C above 40 C
Humidity (non-condensing) Max 95%

 

Dimensions

Victron Phoenix Inverter 12V 800VA
Length 105mm
Width 230mm
Height 325mm

 

Enclosure

Victron Phoenix Inverter 12V 800VA
Material & Colour Steel chassis and plastic cover (blue Ral 5012)
Battery-connection Screw terminals
Maximum cable cross-section 25/10/10mm /AWG4/8/8
Standard AC outlets 230V: Schuko (CEE 7/4), IEC-320 (male plug included)
UK (BS 1363), AU/NZ (AS/NZS 3112)
120V: Nema 5-15R
Protection category IP 21
Weight 5.5kg

 


More information:
Manual
Datasheet