REDARC BATTERY CHARGER BCDC1240D

Description

Redarc BCDC1240D BATTERY CHARGER

The REDARC BCDC1240D In-vehicle Battery Charger is the next generation in REDARC’s DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in ‘Green Power Priority’ it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1240D also comes with patented charging profiles, including a lithium charging profile. The ‘Dual’ input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium.

As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D.

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.

Features:

• Separate DC and solar charging inputs
• Maximises the performance and life of your auxiliary battery
• Simultaneous DC and solar charging with Green Power Priority
• Suits 12V/24V standard and variable voltage/smart alternators
• Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries

Specifications:

Input (Operating) Voltage:  9 – 32VDC
Output System Voltage:  12VDC
Maximum Charging Voltage:  15.3V
Output Current Rating (Cont.):  40A
Input Current (Max.):  40A
Type Approval:  E-Mark
Input Fuse Rating:  60A
Output Fuse Rating:  60A
Warranty:  2 Years
Standby Current Draw:  <100mA
Output Power:  600W
Width (mm):  120
Height (mm):  37
Length (mm):  165
Weight (kg):  1