EPL-200BT-12V-G2_B-TEC-200Amp-12V-G2_Angle-Right-Front_1200x1200-600×600

Enerdrive B-TEC 12V 200Ah G2 Lithium Battery

$2,729.00

In stock

  • Description
  • FAQ

Enerdrive B-TEC 12V 200Ah G2 Lithium Battery

 

Available in 12v 200Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Smart Phone Monitoring System

 

The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

 

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

 

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium G2 = 320Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

 

The New Generation 2 B-TEC

So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.

Dimension Original Generation 2
Length 485mm 505mm
Width 170mm 172.5mm
Height 245mm 265mm

The increase in height allows for full 360° connection of the battery cables the make installation easier and more flexible. Also included for free is a metal battery tray and hold down strap to complete the installation process.

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 3 year full replacement warranty. Additionally, we have also included a further 2 year Pro-Rata warranty to giving you peace of mind knowing that Enerdrive have got you covered.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

The G2 200Ah battery is able to accept a maximum inverter capacity of 2000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.

If you are requiring a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

 

Specifications

 

EPL-200BT-12V G2

Nominal Voltage

12.8V

Nominal Capacity

200Ah

Cycle Life (DOD – 80% under controlled conditions)

2000 Cycles
Standard Charge Specification (Lithium profile charger required)

Battery Charge Temperature

0 – 45 C

Normal Charge Voltage CV/CC*

14.4 – 14.6V

Standby (Float) Voltage

13.5 – 13.8V

Maximum Charge Current

150A @ 25 C for 30 minutes

Recommended Charge Current for Maximum Life

60A
Standard Discharge Specification

Battery Discharge Temperature

-20 – 60 C

Battery Output Voltage Range

11.0 – 14.6V

Maximum Discharge Current

200A @ 25 C 5 C for 30 minutes

Pulse Discharge Current

450A for 1.0s

Discharge Cut-off Voltage

11.2V

Circuit Protection

The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimise each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.

Over-Charge Protection

Over-charge Protection Per Cell

3.90V 0.03V

Over-charge Release Per Cell

3.60V 0.05V

Over-charge Release Method

Discharge below release voltage

Over-Discharge Protection

Over-discharge Protection Per Cell

2.80V 0.05V

Over-discharge Release Per Cell

3.20V 0.05V

Over-discharge Release Method

Apply Charge/Voltage 12.8V

Over Current Protection

Discharge Over Current

220A for 30s 450A for 1s

Protection Reset Time

5s Auto Release

Over Current Release Method

Disconnect Load

Over Temperature Protection

Battery Discharge Over Temperature

Protection to 65 C 5 C

Release at 50 C 5 C

Battery Charge Over Temperature

Protection to 55 C 5 C

Release at 45 C 5 C

Short Circuit Protection

Auto release after 5s

Mechanical Characteristics

Weight

25.0kg

Dimensions

Length

505mm

Width

172.5mm

Height

265mm

Storage Information

Temperature & Humidity Range

30 days -20 C 35 C, 45 75% RH

30 days -10 C 30 C, 45 75% RH

Self-discharge Rate

3% Per Month

 

 

Downloads

B-TEC Battery Monitor App

 

Content missing