Enerdrive B-TEC 100AH 12V LIFEPO4 SLIM BATTERY

$1,535.00

ePOWER B-TEC 100Ah Slim Lithium Battery

In stock

Description

Enerdrive B-TEC 100AH 12V LIFEPO4 SLIM CASE BATTERY

Model: EPL-100BT-12V-SLIM
The 12v 100Ah ,ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

The Enerdrive Enerdrive B-TEC  Slimline battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  •     Battery Capacity
  •     Battery Voltage
  •     Battery Current (Amps)
  •     Battery State of Charge (SOC)
  •     Battery State of Health (SOH)
  •     Battery Status
  •     Individual Cell Voltage
  •     Battery Temperature
  •     Battery Cycles
  •     Battery Alarms
  •     Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Smart Phone Monitoring System

 

Specifications
EPL-100BT-12V-SLIM

Nominal Voltage

12.8V

Nominal Capacity

100Ah

Cycle Life (DOD – 80% under controlled conditions)

2000 Cycles
Standard Charge Specification (Lithium profile charger required)

Battery Charge Temperature

0 – 45 C

Normal Charge Voltage CV/CC*

14.2 – 14.6V

Standby (Float) Voltage

13.5 – 13.8V

Maximum Charge Current

80A @ 25 C for 30 minutes

Recommended Charge Current for Maximum Life

20A-50A
Standard Discharge Specification

Battery Discharge Temperature

-20 – 60 C

Battery Output Voltage Range

11.0 – 14.6V

Maximum Discharge Current

100A @ 25 C 5 C for 30 minutes

Pulse Discharge Current

250A for 1.0s

Discharge Cut-off Voltage

11.2V
Circuit Protection
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimise each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection

Over-charge Protection Per Cell

3.90V 0.03V

Over-charge Release Per Cell

3.60V 0.05V

Over-charge Release Method

Discharge below release voltage
Over-Discharge Protection

Over-discharge Protection Per Cell

2.80V 0.05V

Over-discharge Release Per Cell

3.20V 0.05V

Over-discharge Release Method

Apply Charge/Voltage 12.8V
Over Current Protection

Discharge Over Current

110A for 30s 250A for 1s

Protection Reset Time

5s Auto Release

Over Current Release Method

Disconnect Load
Over Temperature Protection

Battery Discharge Over Temperature

Protection to 65 C 5 C

Release at 50 C 5 C

Battery Charge Over Temperature

Protection to 55 C 5 C

Release at 45 C 5 C

Short Circuit Protection

Auto release after 5s
Mechanical Characteristics

Weight

12.5kg
Dimensions

Length

551mm

Width

109mm

Height

239mm
Storage Information

Temperature & Humidity Range

30 days -20 C 35 C, 45 75% RH

30 days -10 C 30 C, 45 75% RH

Self-discharge Rate

3% Per Month

 

B-TEC Battery Monitor App

 

Please Note; The ePOWER B-TEC battery is not designed to parallel connect extra batteries to increase the overall capacity. This is due to the internal management system BMS which does not have the ability of physical connection to a second B-TEC BMS system for balancing of the cells between each battery.

If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Lithium Power Pack Systems which can offer this level of cell balancing protection.

The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Freight Insurance
Some couriers offer complimentary product indemnity insurance, however, this is a limited policy and not always sufficient to cover the purchase price of your order. We will notify you when this complimentary insurance does not cover the cost of your order and suggest you take out further cover. It will be your choice to take out further cover should you choose to. Should you wish to take out insurance this will be invoiced by us and paid for by you on a separate tax invoice. If you choose not to take out insurance to cover the cost of your purchase, The Battery Base will not be liable for the loss/cost of replacing the damaged goods or shipping costs.

Additional information

Weight 1 g
Dimensions 48.5 × 17 × 24.5 cm
Brand

Lithium

Model

ePOWER

eBay Brand

Enerdrive

Content missing